Part Number Hot Search : 
APU1160 SI3499DV MBD444 5532EDC TM24064A 2SB817 5STP10D LBT37402
Product Description
Full Text Search
 

To Download MIP2K2 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Featuring built-in frequency jitter necessary for EMI, while also conserving power during standby!
High-Performance IPD with Frequency Jitter for Small Charger/Adapter: MIP2Kx Series
Overview
MIP2Kx series is a high-performance IPD designed for 15W battery chargers and featuring built-in frequency jitter function at PWM control. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. It provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby.
Unit : mm
Pin No. Pin Name 1 VDD 2 FB 3 4 5 6 7 8 CL VCC Drain Source Source
Feature
* Built-in jitter function * Built-in charge protection circuit Built-in overcurrent, overheating, load shorting and overvoltage protection circuits
Applications
Chargers (for DSC, etc.), AC adapter
DIP7-A1
Lineup
Type No. MIP2K2 MIP2K3 MIP2K4 MIP2K5 *2 Output *1 Up to 5W Up to 8W Up to 10W Up to 15W 700V Characteristic VDSS ILIMIT 0.35A 0.50A 0.70A 1.0A R(DS)ON 16.5 10 7 5 100kHz 5.5kHz 260Hz DIP7-A1 fosc f fM Package
*1 The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only as a guide. When using it within a case, output electric power may be decided by heat of IPD. *2 All characteristic values are only for reference (still under development).
Comparison data of conduction noise
MIP2F4without jitter function MIP2K4with jitter function
x Average Peak
Decentralized pulse by jitter function Lower the avarage
New publication, effective from 31 Oct. 2008 M00852BE
www.DataSheet.in
Frequency jitter function
By frequency jitter function, frequency jitter variation(f) changes periodically, by frequency of frequency jitter modulation factor (fM) as shown below. fosc=100kHz typ, f=5.5kHz typ, fM=260Hz typ
Frequency: High Frequency: Low
Drain current
105.5kHz Frequency f=5.5kHz fosc=100kHz (average value of frequency) Time
94.5kHz 1/fM=1/260Hz *All values are typical
Adapter circuit sample (MIP2K4)
Electric characteristics (MIP2K4Worldwide input, 8.3V/1.5A output)
VI characteristics of adapter circuit
Vo vs Io
Power efficiency
vs Po
9 8 7 6 5 4 3 2 1 0 0 1 Io [A] 2 3
100V 240V
100 80 60 40 20 0 0 2 4 6 Po [W] 8 10 12
[]
Vo [V]
100V 240V
Precautions on the Sales of IPDs
1) The sale and/or the export of IPD products to any customer or customers located in any country other than Japan is expressly prohibited by the Agreement made and executed by and between Power Integrations, Inc. and Panasonic Corporation. 2) IPD products purchased from Panasonic Corporation, or its authorized agents, hereinafter referred to as our company, shall be used only for production purposes by those parties who have duly purchased IPD products. Those who have purchased IPD products shall not use such IPD products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other parties. 3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other third parties inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is obligated to monitor and control the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments from taking place. 4) In the event that any actual or threatened breach or violation of any of the above mentioned 1, 2, or 3, has occurred or is about to occur, Panasonic Corporation will hold all shipments of IPD products and may request the party alleged to be responsible for such occurrence for necessary.
Parts No.
Able to supply * Domestic Japanese companies * Japanese companies in Asia (50% or more owned)
Disable to supply * European and American companies * Local Asian companies * Other local companies
Application
MIP2K
For power supply
www.DataSheet.in


▲Up To Search▲   

 
Price & Availability of MIP2K2

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X